>
Rails hosting is a hot subject, and with everyone asking everyone else about their experience, I thought its only fair to share my own experience, even though it is relatively limited.
Introduction
I started with a shared “professional” hosting plan from HostingRails. It was around $30/month, and included non-root SSH access to a shared server, and additional 150Mb of RAM for total of 200Mb (although that’s actually quite misleading, see below). I stayed on this plan for about 3-4 months, and then decided to switch to a virtual hosting plan from RailsMachine – their single server plan, for about $100/month (that includes dedicated 384Mb of RAM and a root access to my virtual server). This post describes the reasons behind switching, and compares pros and cons of each hosting plan. Our needs included the following setup:
- One application running in two instances (one production, and one test)
- Two-mongrel instances per application (so total of 4 mongrels)
- Capistrano based deployment / upgrades / restarts of the servers
- Apache 2+
- PostgreSQL 8.2
- Trac (+ MySQL) served over https
- Subversion repository served over https
- Subversion post-commit hook linked to a build environment, for continuous integration
- Automated remote daily backup of the entire environment
To be fair, the plans described here compare sort of like apples and oranges, so the review has to be taken with a grain of salt. Main differences are, of course, in the fact that one is a shared plan and the other one virtual hosting. People on smaller budget and without tight performance requirements will probably prefer the shared plan, while those with a bit more room in the budget and some UNIX know-how will most likely be much happier with virtual hosting. My hope is that perhaps this review will help someone make the right call for their environment based on their needs, budget and experience.
Detailed Comparison
1. HostingRails
- Pros
- Cheap, only $30/mo for 4 mongrel instances (200Mb)
- Easy Trac/SVN install
- Rudimentary backup can be run from web UI
- Friendly support staff
- Timely support, usually within an hour or two
- Lots of info on forums
- Cons
- [Update: please see comments section for HostingRails response]. Slow, slow, and slow. We were sharing a server with 4Gb of RAM with another 50+ mongrel instances run by as many users. The server used over 1Gb of swap space and often showed load averages over 30. We were promised numerous upgrades, which did not materialize while we were using the service. Our sites and Trac at times took over 30 seconds to load the first page, probably while the corresponding process was getting un-swapped.
- Have to email support for any changes to top-level apache configuration, such as adding domain aliases. This applies to setting up Trac, svn and mongrel apps.
- Provided backup facility does not backup PostgreSQL/mysql DB, had to write our own script (but forums had a good starting point)
- Our mongrels clearly were not allocated any amount of “reserved” RAM. Looks like buying extra 150Mb in reality means you can run three more mongrel instances, but has nothing to do with how much RAM you actually get, as was witnessed by swap usage stats.
- As we decided to move because of performance issues, HostingRails refused to refund us the unused portion of the yearly fee we paid ahead as we were past first 30 days.
- Locked in their choice of Ruby version, gems, PostgreSQL, MySQL, Trac – can not upgrade these individually, as each is shared among many clients.
Overall, I think that HostingRails has to fix performance issues and not pack as many clients on a single server if they want to be a viable solution for any business. Until they fix performance issues I would NOT recommend this service to anyone. If the performance is fixed, I would recommend this plan to less experienced engineers, who may not know how to use root on a UNIX system, or setup Apache, but have some basic understanding of Rails deployment. I would also recommend this plan on those with a really tight budget.
RailsMachine
RailsMachine provides virtual hosting, meaning you get your own dedicated server with root access. The server, OS and pre-installed software details can be found on RailsMachine website. Because you are sort of expected to use root access, some basic UNIX system administration skills are necessary to take advantage of this plan. However, the flexibility and power that come with this solution by far outweigh the additional $60/month we are paying for our own box. Note that we could pay only $75/month for 256Mb of RAM, but considering the list of applications we wanted to run, I chose to upgrade our plan to at least 384Mb.
- Pros
- Much, much, much, faster. When using command line, sometimes you see server “hanging” momentarily while presumably other virtual machines are being processed, but the overall performance improvements are quite dramatic. Pages (trac/mongrel) load within 1-2 seconds consistently.
- Fantastic provided Apache configuration, comes with plenty of dynamically compiled modules, template config files and modular structure. Our single apache server is providing umbrella access to both mongrel apps, SVN over https and Trac over https (using mod_wsgi, not CGI).
- RailsMachine gem allows seamless initial capistrano deployment and subsequent installations
- Apparently each virtual server is backed up automatically (but we do our remote backups anyway)
- CentOS Linux provides convenient yum utility for installing pre-built packages. Sometimes it takes a few minutes to find the right package using “yum search” but once found, installation is a breeze.
- Root access allows installing what you need for your environment, eg – latest PostgreSQL, latest Trac, etc. Was able to install mod_wsgi module to enable much faster Trac access than using traditional CGI access.
- Our entire setup described above takes up 180Mb of RAM, with another 180Mb left for file system caching. Pre-installed MySQL and Apache are built with multi-threading enabled, so the processes manage their shared RAM very effectively. This means we have room to add another 2-3 mongrel instances to the setup without affecting pricing of our plan.
- Responsive, knowledgeable support, although just the nature of the setup means you have to ask a lot LESS questions if you know what you are doing, since you can get most of the things installed yourself without bugging them.
- Cons
- [Update: this has been fixed, see comments section] The server came installed with broken permissions on /etc/resolv.conf and /etc/hosts file. This broke host/domain name resolution from the host itself, until the permissions were set to allow read access to the above files.
- Slightly more expensive.
- Occasionally (but mostly rarely), shell access has a latency that appears to be CPU bound by the physical server and not the network.
Overall, I would absolutely recommend RailsMachine to a technically savvy engineers, who want freedom of their own box at a very affordable price. Ability to grow the size of the virtual box dynamically is also great – it’s very nice to know that when you need extra 1Gb of RAM, it’s there waiting for you (and your wallet).
Install Notes
A quick note about SVN/Apache configuration with authorization turned on. This has been mentioned on many SVN forums, but if you are setting it up, please be aware that mod_dav_svn contains memory leak that makes apache seg-fault during checkouts of a large repository tree (we are using authorization as well as authentication). I had to add the following clause to apache config for SVN directory to resolve to issue: SVNPathAuthz off This is what our SVN configuraiton looks like in case someone is looking for a complete config:
<VirtualHost *:443>
ServerName svn.YOURDOMAIN.com
SSLEngine On
SSLCertificateFile /etc/httpd/sslcert/server.crt
SSLCertificateKeyFile /etc/httpd/sslcert/server.key
<Location />
DAV svn
SVNPath /var/lib/subversion
AuthzSVNAccessFile /var/lib/subversion/conf/authz
SVNPathAuthz off
AuthType Basic
AuthName "Authorization Realm"
AuthUserFile /var/lib/subversion/conf/passwd
Require valid-user
</Location>
</VirtualHost>
References
-
Memory Leak in mod_dav_svn
Closing Notes
Here are the responses I got from HostingRails and RailsMachine – thanks guys…
Hi Konstantin, The issue with broken permissions on hosts/resolv/others has been fixed. It was due to a small (and short-lived) bug in our provisioning system. Thanks for mentioning us! -Rob at Rails Machine
Hi Konstantin, there’s a couple things I’d like to point out that I hope you’d be willing to correct in your review. I understand that you had a bad experience with us and respect your right to voice it.
- Running a cluster of 4 Mongrels will only cost $22/mo on our professional plan, and $26, $32/mo on our business and platinum plans, respectively.
- On our site we outline that we’re selling (physical + virtual) memory in blocks of 50MB on shared servers — when Mongrels or Static FastCGI instances are fired up they consume (’reserve’) these resources persistently.
Overall, and I suppose you’d have to take my word for it, your server ran into an unfortunate resource situation with a number of users who are now either suspended due to malicious behavior or upgraded to dedicated environments due to extraordinary growth of their apps. Most of our clients are having good hosting experiences with us and we’re working hard to maintain fast and reliable shared servers for Rails deployment at the lowest possible price. All the best, ~William at HostingRails
— William, thank you for your corrections and I appreciate that it must not be easy to maintain quality service at such a competitive price. I’ve updated the pricing I mention and added a reference to your comment. I am willing to believe that our server may have been exception rather than a rule, and I hope that in the future you have a way to move clients off loaded machines quickly.
Thoughts on Life, Tek and Music 